Categories

False alarms and system glitches can be exasperating, and even worse, might prevent your security system from working the way it should. Luckily, most problems, from false alarms to dead batteries, are easy to correct. Take a look at our suggestions for troubleshooting your home alarm system in Monroe. We’ll help keep your family members safe and your system operating the way it should.

Test Your Home Security System In Monroe

One of the most sensible ways to troubleshoot your property’s security is to test it yourself! Newer systems let you put them in test mode to keep you from initiating an emergency response from monitoring agents. Once in test mode, take these steps:

• Turn on your system as you typically would when you exit your home.
• Open a window or door that uses a contact sensor, or try to trip another sensor. Shut the door or window so it doesn’t trigger the alarm as you turn the system back on.
• Let the alarm sound for 60 seconds to make sure a signal is delivered to the security company and an entry is made in the alarm activity log.
• Continue testing sensors as you wish
• Inspect the systems’s activity log to validate that everything’s working.

Don’t worry, monitoring specialists can see that your system is being tested. Be sure to turn test mode off when done. It’s smart to test every other month or anytime you change your home’s internet or phone service.

Check The Positioning And Condition Of Motion Detectors

Although an crucial part of your alarm system, motion detectors are notorious for false alarms. You can help prevent them with some easy troubleshooting.

• Do a visual inspection. Is there anything that could shift within range of the sensor, like a curtain blown in a breeze?
• Is the sensor dirty? Grime, dirt, and cobwebs can lead to poor performance. Ensure the face is clean.
• Does the motion detector have pet immunity you can turn on? Some can be configured to disregard pets weighing up to 100 pounds.
• When was the battery last replaced? Low batteries can impact performance or cause false alarms.
• Is a heat source impacting the sensor? Too much heat from sunlight or a fireplace can set off an alarm.

Keep Batteries Ready And Pay Attention To Low Battery Signals

One of the great aspects of modern home security systems is that they’ll let you know when batteries are dying. If your system is equipped with a control panel or smartphone app, you’ll typically discover notifications there. Depending on your alarm, you might hear an intermittent beep when batteries are getting low. 

Contact sensors, smoke detectors, motion sensors, and other wireless tools have batteries that will have to be replaced every 1 to 2 years. It’s best to keep batteries around and create a replacement schedule. Top systems also come with a backup battery for the main control panel. This backup helps keep your system operating if you lose power and should charge back up once the electricity is working again. If it doesn’t recharge, you will need to replace it.

Troubleshooting Is Effortless With ADT Home Security In Monroe 

As the leading name in home security, ADT builds systems that offer unrivaled functionality and convenience. Switching to test mode is simple through the ADT+ app or MyADT.com, and you’ll always get alerts when a sensor battery is running low. Contact Secure24 Alarm Systems, an authorized ADT dealer, to learn more and design a system perfect for your Monroe home. Dial (318) 226-6496 or fill out our form today!